For most work, the datum references of the workpiece need to be square. One convention is to mark the first datum edge with a single slanted line (/) and the second with double lines (//). The artisan nominates two straight edges on a workpiece as the 'datum edges', and they are marked accordingly. In carpentry, an alternative, more common name is 'face side' and 'face edge'. The concept of datums is used in many fields, including carpentry, metalworking, needlework, geometric dimensioning and tolerancing (GD&T), aviation, surveying, geodesy ( geodetic datums), and others. This matters because the hub and rim need to be concentric to within close limits (or else the wheel will not roll smoothly). For example, on a car's wheel, the lug nut holes define a bolt circle that is a datum from which the location of the rim can be defined and measured. JSTOR ( November 2015) ( Learn how and when to remove this template message)Ī datum reference or just datum (plural: datums ) is some important part of an object-such as a point, line, plane, hole, set of holes, or pair of surfaces-that serves as a reference in defining the geometry of the object and (often) in measuring aspects of the actual geometry to assess how closely they match with the nominal value, which may be an ideal, standard, average, or desired value.Unsourced material may be challenged and removed.

Please help improve this article by adding citations to reliable sources. This article needs additional citations for verification.

Datum reference frame